Dresser-Rand Part 21 Documentation

The U.S. Nuclear Regulatory Commission (NRC) receives reports from its licensees under Part 21 of Title 10 of the Code of Federal Regulations. This regulation specifies the conditions under which information must be submitted when a licensed facility, activity, or basic component fails to comply with the Atomic Energy Act of 1954, as amended, or other NRC regulations.

The following Part 21 documents were submitted by Dresser-Rand and the Terry Corporation:

Description	Dresser-Rand Report No.
Pressure Retaining Components	1
Bodine Motor Drive	2
Rev. Chamber Lock Plate Screws	3
GS-Nuclear Steam Turbine	4
GS-Nuclear Steam Turbine	5
CCS/CS (HPCI) Turbine	6
GS-Nuclear Steam Turbine	7
GS-Nuclear Steam Turbine	8
EGM Control Box	9
Electrical Connector/Cable Assemblies	10
Airpax Tachometer Module	11
Overspeed Ball	12
Ramp Start Switch	13
T &T Valve 4 in./900 lb.	14
Limitorque Motor Operator	15
Woodward PG Governor	16
Woodward PG Governor	17
Limitorque Motor Operator	18
Plug, Valve	19
Anit Rotation Pin	20
Gimpel 4 in./900 lb. T & T Valve	21
Oil Cooler	22
Guide, Upper Valve Stem	23
EGR Remote Servo for HPCI	24
Pressure Switch	25
Heater Element	26
Diaphragm for Robert Shaw Valve	27
Electrical T & T Valve Control	28
Valve Guide (Upper)	29
Overspeed Trip Tappet	30
Pilot Valve	31
Gimpel 4 in./900 lb. T & T Valve	32
Relay "Agastat"	33
Overspeed Trip Tappet	34
Solenoid Valve P/N: 890086A06	35
Fitted Bolt	36
Valve Stems	37
Gimpel T & T Valve	38
Nut-Lock-Flex Loc. Reg Height	39
Governor Valve Stem	40
Gimpel T & T Valve Screw Spindle	41
Inconcel Valve Stem	45

Part 21 Documentation

White Papers

Additional Information

Contact Information